⚠️ Affiliate Disclosure: This post contains Amazon affiliate links. If you purchase through our links, we may earn a small commission at no extra cost to you. Every product below was checked against its live Amazon listing before publishing. Prices change often, so we don’t list them here. Tap any Buy Here button to see the current price on Amazon.
Ultimate Buying Guide
📟 Best Bench Multimeters for Electronics
A bench meter gives you more digits, faster readings, a second display and PC logging over USB. Here are 9 benchtop DMMs, from compact OWON meters to 5.5-digit Rigol, Siglent and Keysight instruments.
✅ 9 Meters Compared
✅ Verified Amazon ASINs
✅ Digits and Accuracy Explained
✅ Honest Pros & Cons
A handheld meter is perfect for quick checks, but once you start characterising ESP32 projects, a bench multimeter earns its space. It sits powered on all day, shows two measurements at once (for example a 3.3 V rail and its ripple frequency), resolves millivolts and microamps with more digits, and most models can stream readings to a PC over USB so you can log a regulator’s drift or a battery’s discharge without writing anything down.
This guide compares 9 bench meters across three tiers: compact 4.5-digit meters that fit a crowded hobby bench, mid-range 4.5 to 5.5-digit instruments with LAN and big screens, and a lab-grade Keysight. We focus on what matters for ESP32 work: DC voltage accuracy, low-current ranges, reading speed and logging.
💡 Before you buy: More digits only help if the accuracy backs them up. For hobby work, a meter with around 0.05% basic DC accuracy already resolves an ESP32’s 3.3 V rail to the millivolt. Spend more when you need logging speed, LAN remote control for automated tests, or traceable lab accuracy. And remember a bench DMM’s current ranges are not a deep-sleep current profiler; for microamp sleep currents on a moving load, see our USB power meters guide.
⚡ Quick Comparison: All 9 Meters
| Meter | Resolution | Key Spec | Best For | Buy |
|---|
| 🥇 Rigol DM3058E | 5.5 digit | 123,000 counts, dual display, USB/RS232 | Best Overall | Buy Here → |
| 💰 OWON XDM1041 | 4.5 digit | 55,000 counts, 0.05% DCV, USB SCPI | Best Budget | Buy Here → |
| 📱 Rigol DM858E | 5.5 digit | 7 in touch screen, USB-C powered | Best Touchscreen | Buy Here → |
| 🏛️ Keysight 34450A | 5.5 digit | 0.015% DCV, 190 rdgs/s, OLED | Best Lab-Grade | Buy Here → |
| 🔋 OWON XDM1241 | 4.5 digit | Rechargeable battery, USB-C | Best Portable Bench | Buy Here → |
| 🇺🇸 B&K Precision 2831E | 4.5 digit | 0.03% DCV, 20 A, dual display | Best High-Current | Buy Here → |
| 🌐 Siglent SDM3045X | 4.5 digit | 66,000 counts, 150 rdgs/s, LAN | Best for Automated Tests | Buy Here → |
| 🔬 Siglent SDM3055 | 5.5 digit | More resolution, same platform | Best 5.5-Digit Siglent | Buy Here → |
| ⚙️ UNI-T UT8804E | 4 5/6 digit | 59,999 counts, true RMS | Best Mid-Range Value | Buy Here → |
Specs come from the manufacturers and the live Amazon listings. Star scores below are our ratings.
🔍 What Matters in a Bench Multimeter
🎯
Basic DC Accuracy
The single most useful number. 0.05% reads a 3.3 V rail within about 2 mV; 0.015% within half a millivolt.
🔢
Digits and Counts
4.5 digits (20,000 to 66,000 counts) suits most hobby work. 5.5 digits adds a decimal place for precision references and drift tests.
⏱️
Reading Rate
Faster rates catch brief dips when an ESP32 transmits. 100+ readings per second makes logged graphs far more useful.
🖥️
Interfaces
USB with SCPI lets a Python script log readings. LAN adds web control and test rigs shared across a network.
📺
Dual Display
Two readings from one connection, such as AC voltage and frequency, or DC volts with a min/max trend.
🏆 Detailed Reviews: The Top Two
🥇 BEST OVERALL BENCH MULTIMETER
Rigol DM3058E 5.5-Digit Digital Multimeter
⭐ 4.7/5 · Our Rating · Proven 5.5-Digit Value
Buy on Amazon →

The DM3058E has been the go-to affordable 5.5-digit bench meter for years, and it still is. It resolves 123,000 counts, reads at up to 123 readings per second, measures true RMS AC, and its dual display shows a second quantity such as frequency alongside AC voltage. Practical extras include pass/fail limit testing, 10 stored setups and an “any sensor” mode that scales thermocouple or other sensor readings into real units. USB and RS232 let you log over SCPI from a script. Its ranges reach 1000 V and 10 A. The interface feels dated next to touchscreen meters, and there’s no LAN on the E version.
✅ Pros- True 5.5-digit resolution
- Fast for its class
- Dual display
- Proven, well documented
❌ Cons- Dated monochrome UI
- No LAN on the E model
- Larger footprint
🎯 Verdict: The best balance of resolution, speed and value for a serious electronics bench.
👉 Check Price on Amazon →
💰 BEST BUDGET BENCH MULTIMETER
OWON XDM1041 Bench Multimeter
⭐ 4.5/5 · Our Rating · Small and Affordable
Buy on Amazon →

The XDM1041 is the meter that made bench DMMs affordable for hobbyists, and it’s small enough to sit beside a breadboard. It shows 55,000 counts on a 3.5 inch colour screen with a dual-line display, reaches DC voltage accuracy of up to 0.05% and reads up to 65 times per second. Current ranges run from 500 µA up to 10 A, AC is true RMS, and it adds temperature (K-type and PT100), capacitance and a 1,000-point data log. A USB port with SCPI means a few lines of Python can log an ESP32 project’s supply rail overnight. It runs from mains power, and its AC bandwidth is limited to 1 kHz.
✅ Pros- Very affordable
- Compact footprint
- USB SCPI logging
- Temperature and capacitance
❌ Cons- AC limited to 1 kHz
- No LAN
- Mains powered only
🎯 Verdict: The best first bench meter for a hobby electronics desk.
👉 Check Price on Amazon →
🔧 Detailed Reviews: More Bench Meters
📱 BEST TOUCHSCREEN · ⭐ 4.6/53. Rigol DM858E Compact Benchtop Multimeter
5.5 digit · 80 rdgs/s · 0.06% 1-year DCV · 7 in 1024 × 600 touch screen · USB-C power
Buy Here →

Rigol’s newer DM858E rethinks the bench meter for crowded desks. A 7 inch touch screen shows main and auxiliary readings with trend charts, it measures 11 input types including 2- and 4-wire resistance, temperature and capacitance, and it records a large reading memory. Uniquely, it’s powered over USB-C, and Rigol says the family can run for hours from a suitable power bank, which makes it ideal for field testing a solar ESP32 node. It reads at 80 per second with 0.06% one-year DC accuracy, so the DM3058E is the more precise meter, but the DM858E is far nicer to use.
✅ Pros: Big touch screen; trend charts; USB-C power; compact.
❌ Cons: Lower accuracy than DM3058E; touch UI not for everyone.
🎯 Verdict: The most modern-feeling bench meter here, and the most portable 5.5-digit option.
🏛️ BEST LAB-GRADE · ⭐ 4.8/54. Keysight 34450A 5.5-Digit Digital Multimeter
0.015% DCV · 190 rdgs/s · dual-display OLED · 50,000-reading memory · USB, RS232
Buy Here →

When accuracy has to be beyond question, Keysight’s 34450A is the reference here. Its 0.015% basic DC accuracy is the best in this guide, it reads at up to 190 readings per second, and a sharp, high-contrast OLED dual display stays readable from across the bench. It stores 50,000 readings and has built-in histogram and statistics views, which is handy for characterising a batch of regulators or sensors. USB and RS232 are standard with GPIB optional, all SCPI-compatible. It costs considerably more than the Rigol and OWON meters, and that extra accuracy is overkill for most hobby projects.
✅ Pros: Best accuracy; fast; OLED display; statistics built in.
❌ Cons: Premium cost; no LAN as standard.
🎯 Verdict: The lab-quality choice for professional product development.
🔋 BEST PORTABLE BENCH METER · ⭐ 4.5/55. OWON XDM1241 Bench Multimeter with Battery
55,000 counts · 0.05% DCV · 65 rdgs/s · rechargeable lithium battery · USB SCPI
Buy Here →

The XDM1241 takes everything good about the XDM1041 (55,000 counts, 0.05% DC accuracy, 65 readings per second, 500 µA to 10 A ranges, temperature, capacitance and USB SCPI logging) and adds a rechargeable lithium battery. Running from battery breaks the mains ground connection, which is useful when you’re measuring a circuit that shares ground with a USB-powered ESP32 and a laptop, and it means you can carry the meter to an installed project. If your bench never moves, the cheaper XDM1041 does the same job.
✅ Pros: Battery powered; isolated from mains; same specs as XDM1041.
❌ Cons: Costs more than XDM1041; same 1 kHz AC limit.
🎯 Verdict: The pick if your bench meter also needs to travel.
🇺🇸 BEST HIGH-CURRENT · ⭐ 4.4/56. B&K Precision 2831E True RMS Bench Multimeter
4.5 digit · 0.03% DCV · 20 A AC and DC · dual display · AC + DC true RMS · USB
Buy Here →

The 2831E is a no-nonsense workhorse from a long-established US test brand. Its standout spec is a 20 A AC and DC current range, double the 10 A of most bench meters, which is useful when you’re measuring LED strip feeds, motor drivers or a 12 V supply powering several ESP32 nodes. It offers 0.03% basic DC accuracy, a dual display, AC + DC true RMS, and math functions including relative, min/max, dB and percent. It reads at up to 25 per second, so it’s slower than the others for logging.
✅ Pros: 20 A range; good accuracy; simple, rugged design.
❌ Cons: Slow reading rate; basic display.
🎯 Verdict: The bench meter for measuring big currents directly.
➕ Also Worth Considering
🌐 BEST FOR AUTOMATED TESTS · ⭐ 4.6/5
7. Siglent SDM3045X
A 4.5-digit, 66,000-count meter that reads at up to 150 readings per second and adds LAN to USB device and host ports, all SCPI-controlled. The 4.3 inch colour screen supports dual display, and it measures temperature and capacitance as well as the usual functions. LAN makes it the easiest meter here to build into an automated ESP32 test rig.
Buy Here →🔬 BEST 5.5-DIGIT SIGLENT · ⭐ 4.6/5
8. Siglent SDM3055
The 5.5-digit step up in Siglent’s SDM3000 family. You get extra resolution for precision references, drift measurements and low-value resistors, in a familiar Siglent platform with a colour screen and remote interfaces. Choose it over the SDM3045X when the last digit matters, and over the Rigol DM3058E when you prefer Siglent’s interface.
Buy Here →⚙️ BEST MID-RANGE VALUE · ⭐ 4.4/5
9. UNI-T UT8804E
Part of UNI-T’s UT8000E benchtop series, the UT8804E is a true RMS meter with a 4 5/6-digit (59,999-count) display. It sits between the compact OWON meters and the 5.5-digit instruments. The Amazon listing covers the whole UT8000E series, so make sure UT8804E is selected before you buy.
Buy Here →🔬 Which Meter for Which ESP32 Job?
| Job | What Matters | Best Pick |
|---|
| Check 3.3 V regulator accuracy and drift | DC accuracy, digits | Rigol DM3058E or Keysight 34450A |
| Log a battery discharge overnight | USB SCPI logging | OWON XDM1041 or Siglent SDM3045X |
| Calibrate ADC readings on an ESP32 | Stable 5.5-digit reference | Rigol DM3058E or Siglent SDM3055 |
| Measure LED strip or motor current | High current range | B&K Precision 2831E |
| Automated production test rig | LAN, speed | Siglent SDM3045X |
| Test a solar node outdoors | Battery or USB-C power | OWON XDM1241 or Rigol DM858E |
🛒 Which One Should You Buy?
🧑🔧
First bench meter
The OWON XDM1041, or XDM1241 if you want a battery.
🎯
Serious hobby or startup bench
The Rigol DM3058E, or the DM858E for a touch screen.
🏛️
Professional lab
The Keysight 34450A, or a Siglent for LAN automation.
❓ Frequently Asked Questions
Do I need a bench multimeter if I already own a handheld?
Not to get started. A bench meter becomes worthwhile when you want a meter permanently connected while you work, two readings at once, more resolution, or readings logged to a PC. Many people keep both: the handheld for quick checks, the bench meter for measurements over time.
What does 5.5 digits mean?
The meter shows five full digits plus a leading digit that can only be 0 or 1, so it can display up to about 199,999 counts on a range. Many modern meters exceed that and are described by their total counts instead, such as 55,000 or 123,000.
Can a bench meter measure ESP32 deep-sleep current?
It can read a steady sleep current on a µA range, but the burden voltage of the shunt can upset the board, and the meter can’t follow the jump to a 300 mA Wi-Fi burst on the same range. For full sleep-and-wake profiles use a dedicated current profiler.
How do I log readings to my PC?
Most meters here appear as a USB serial or USBTMC device that accepts SCPI commands. A short Python script using pyserial or PyVISA can send a measure command, read the value and write it to a CSV file with a timestamp.
Why does the reading change when I connect my laptop?
A mains-powered meter, a USB-connected ESP32 and a laptop can form a ground loop. Measure differentially where possible, use a battery-powered meter like the XDM1241, or power the ESP32 from an isolated supply while measuring.
🏁 Final Verdict: Best Bench Multimeters
The right meter for each bench:
For most ESP32 benches, the OWON XDM1041 is the smart first bench meter, and the Rigol DM3058E is the upgrade that will last for years. Pick the Keysight 34450A when accuracy is non-negotiable, and a Siglent when you want LAN automation. Complete the setup with our test leads and probes, bench power supplies, USB power meters and current profilers and handheld multimeters guides.
💬 Choosing between two of these meters? Tell us what you measure most in the comments below, and we’ll help you decide.
All Amazon links above use our affiliate tag (esp32tutorials-20). Purchasing through them supports esp32tutorials.com at no extra cost to you. Prices and availability change frequently, so always confirm the current price on Amazon before buying.
We are a team of experienced Embedded Software Developers with skills in developing Embedded Linux, RTOS, and IoT products from scratch to deployment with a demonstrated history of working in the embedded software industry. Contact us for your projects: admin@esp32tutorials.com